? JC631 Differential Pressure Transducer - Jiucheng

      <wbr id="o7fmd"><pre id="o7fmd"></pre></wbr>
      <form id="o7fmd"><pre id="o7fmd"></pre></form>
      • Differential Pressure Transducer
      • Differential Pressure Transducer
      • Differential Pressure Transducer
      • Differential Pressure Transducer

      TYPE:JC631

      NAME:JC631 Differential Pressure Transducer

      JC631 Differential Pressure Transducer adopts foreign-made differential pressure sensitive chips and special transducer integrated circuits as well as high-performance keycomponents and strict production process to ensure that this series product features superior performance, small dimensions and easy installation.

      JC631 Differential Pressure Transducer

      ●Differential Pressure Transducer Overview

      JC631 Differential Pressure Transducer adopts foreign-made differential pressure sensitive chips and special transducer integrated circuits as well as high-performance keycomponents and strict production process to ensure that this series product features superior performance, small dimensions and easy installation. Therefore, it is the optimum choice for micro differential pressure, flow field, flow rate, and flow measurement.

      ●Differential Pressure Transducer Features

      *High cost performance
      *Reliable and stable performance
      *Range of differential pressure: 0 ~ 10KPa … 2MPa
      *Resistant to static pressure of up to 20MPa
      *Fully made of stainless steel, with small dimensions,light weight, and easy installation

      ●Differential Pressure Transducer Applications

      *Industrial process control
      *Medical instrument
      *Aerodynamic measurement
      *Hydraulic and pneumatic equipment
      *Flow measurement
      Measuring range 0~10KPa…2 MPa
      Full scale range 10~ 50KPa 50~100KPa 0.1~0.2MPa 0.2~0.5MPa 0.5~1MPa 1~2MPa
      Positive permissible overpressure 250KPa 300KPa 0.4MPa 1.0MPa 2MPa 4MPa
      Negative permissible overpressure 100KPa 200KPa 0.3MPa 0.5MPa 0.7MPa 1MPa
      Maximun static pressure ≤20MPa
      Overall accuracy (linearity + repeatability+ hysteresis) ? ±0.1%FS ±0.25%FS ± 0.5%FS
      Zero temperature error ±0.02%FS/℃(typical) ±0.05%FS/℃(maximum)
      Sensitivity temperature error ±0.02%FS/℃(typical) ±0.05%FS/℃(maximum)
      Influence of static pressure ±0.05%FS/100KPa
      Operating temperature -10~80℃
      Compensation temperature -10~50℃
      Long-term stability ±0.3%FS/year(≤200kPa) ±0.1%FS/year(≥200kPa)
      Range of power supply 12~36V DC(generally 24V DC)
      Output signal Two-wire 4~20mA DC, three-wire 0/1~5V DC
      Response time ≤2 ms
      Insulation resistance 100MΩ,500VDC
      Influence of vibration ≤1% change after vibration at 3gRMS 30~2000Hz
      Impact ≤1% change after impact of 100g for 10ms
      Service life 1×108pressure cycles
      Medium The liquid or gas adapting to structural material
      Enclosure protection class Plug-in type(IP65); cable type(IP67)
      Safety and explosion protection Ex iaⅡ CT5(intrinsically safe explosion-proof type)
      Weight Approx 0.35kg
      Thermal hysteresis ±0.1%FS(typical value)
      Enclosure protection class Plug-in type(IP65); cable type(IP67)

      Tips for Type Selection
      1. In order to guarantee safe and reliable operation of the transducer, differential pressure transducer is recommended that the three-valve manifold should be installed between the point to be measured and the transducer to ensure that the medium to be measured is slowly and evenly applied on the positive and negative chambers.
      2. During installation, it is recommended that pressure connections on both ends should be located above the horizontal line so as to minimize the influence of the installation position on the product.
      3. During type selection, please note that the static pressure to be measured shall be less than 20MPa and the overpressure to be applied on the positive and negative chambers shall not exceed the specified value of the product.
      4. As an additional function code for type selection, the code “E” for intrinsically safe explosion-proof type Ex iaIICT6 denotes that power source must be supplied via safety barrier
      5. For other special requirements, please discuss with us and clearly indicate them in the order.

      今天晚上开的什么码 泸水县| 聊城市| 武强县| 万盛区| 财经| 中阳县| 岱山县| 仁布县| 宝兴县| 曲靖市| 昌宁县| 平邑县| 绍兴市| 屏边| 呼伦贝尔市| 孟连| 拉孜县| 喀喇| 金堂县| 安远县| 孟州市| 连江县| 文成县| 台州市| 田东县| 安徽省| 江川县| 密云县| 拉萨市| 吴江市| 上虞市| 睢宁县| 丹阳市| 雷州市| 永福县| 陆良县| 长治市| 晋城| 鹤峰县| 黎川县| 沙坪坝区| http://m5.lsjj2f.club http://china.sinase9y.pw http://cp.u4wclh.top http://www.lsjbkj.club http://www.k30369.cn http://m.l572bk.top