? JC621R Anti-corrosive Liquid Level Transducer - Jiucheng

      <wbr id="o7fmd"><pre id="o7fmd"></pre></wbr>
      <form id="o7fmd"><pre id="o7fmd"></pre></form>
      • Anti-corrosive Liquid Level Transducer
      • Anti-corrosive Liquid Level Transducer

      TYPE:JC621R

      NAME:JC621R Anti-corrosive Liquid Level Transducer

      As a new liquid level measurement series product, JC621R Anti-corrosive Liquid Level Transducer is specially designed for measuring sea water level and viscous & corrosive liquid level by completely using foreign state-of-the-art technology.

      JC621R Anti-corrosive Liquid Level Transducer

      ●Anti-corrosive Liquid Level Transducer Overview

      As a new liquid level measurement series product, JC621R Anti-corrosive Liquid Level Transducer is specially designed for measuring sea water level and viscous & corrosive liquid level by completely using foreign state-of-the-art technology. The use of titanium alloy large flush-diaphragm sensors, advanced manufacturing and encapsulating techniques, as well as high–accuracy electronic elements has greatly enhanced service life and comprehensive performance of the product. The use of internationally state-of-the-art ceramic capacitive sensors, dry pressure measuring technology with intermediate liquid, thick-film electronic technology, surface mount technology (SMT) and PFM signal transmission technology has given full play to technical advantages of ceramic capacitive sensors, with strong corrosion, overloading and impact resistance capabilities, high stability, and quite high measuring accuracy. This series product can be extensively used in many measurement and control fields of such corrosive and viscous liquid levels as sea water level.

       

      ●Anti-corrosive Liquid Level Transducer Features

      *Strong corrosive resistance
      *Large flush-diaphragm design and good block resistance
      *A wide range of measurement from micro pressure 0.5m to high pressure 200m.
      *Strong overloading and impact resistance capacity, with overpressure up to dozens of times to hundreds of times of the measuring range.
      *Adoption of imported ceramic capacitive sensors, with strong signal output, high overall accuracy and good stability.
      *Small temperature drift due to intermediate liquid canceled for measuring elements.

       

      Measuring range 0~0.5m…200m
      Overload capacity Three times of the maximum rated pressure
      Measuring media Corrosive liquid (the medium compatible with AL2O3)
      Overall accuracy ±0.1%FS ±0.25%FS ±0.4%FS ±1%FS
      Long-term stability Typical:±0.1%FS/year Maximum:±0.2%FS/year
      Operating temperature range Integrated: -20℃~70℃ Split (plug-in):-20℃~80℃
      Compensation temperature range Integrated: -10℃~55℃ Split (plug-in):-10℃~70℃
      Zero-point temperature drift Typical:±0.02%FS/℃ Maximum:±0.05%FS/℃
      Sensitivity temperature drift Typical:±0.02%FS/℃ Maximum:±0.05%FS/℃
      Range of power supply 12~36VDC(generally 24VDC)
      Signal output 4~20mA/1~5VDC/ 0~5VDC
      Load resistance ≤(U-12)/0.02? Ω
      Structural material Enclosure:316L (optional) Diaphragm:titanium alloy
      Sealing: fluorosilicone rubber(optional) Cable:Φ7.2mm special PE cable(optional)
      Insulation resistance 100MΩ,500VDC
      Protection class Enclosure protection class IP68
      Safety and explosion protection Ex iaⅡ CT5
      Response time ≤2 ms
      Resolution Infinitely small(theoretic),1/100000(normal)
      Weight Approx.250g

      JC621R

      ?Anti-corrosive Liquid Level Transducer
      Measuring range ?0~X m or 0~X KPa

      Code

      ?Structural form(maximum operating range)

      C1

      ?Integrated:0~200m

      C2

      ?Split:0~10m

      C3

      ?Plug-in:0~4 m

      Code

      Overall accuracy (linearity + repeatability + hysteresis)

      0

      ? 1.0%FS

      1

      ? 0.4%FS

      2

      ? 0.25%FS

      3

      ? 0.1%FS

      Code

      ?Signal output(standard power supply)

      A1

      4~20mA (12~36V DC)

      V1

      1~5V DC (12~36V DC)

      V2

      0~5V DC(12~36V DC)

      Code

      Additional functions

      F1

      G11/2? male thread(split and plug-in)

      F2

      DN20 flange(split and plug-in)

      F0

      Special

      E

      Intrinsically safe explosion-proof type Ex iaIICT5

      F

      Lightning protection type
      JC621R(0~10mH2O)—C1 —1 —A1 —E Anti-corrosive Liquid Level Transducer

       

      Tips for Type Selection

      1. The medium to be measured shall be compatible with the material contacting with the product. Meanwhile, the density of the medium to be measured during measurement shall be indicated (except for water).
      2. As an additional function code for type selection, the code “E” for intrinsically safe explosion-proof type Ex ia II CT5 denotes that power source must be supplied via safety barrier.
      3. The length of cables shall be L = X m + 1m. Please indicate any extension (if needed) when placing an order. There are two kinds of cable materials. By virtue of its more flexibility and good wear resistance, polyurethane material can be selectively used. Where no special requirement is indicated, cables to be supplied shall be made of PVC material.
      4. The corresponding relationship of 1m water columns with pressure under standard conditions ( i.e. 4℃, g = 9.80665 m / s2):1mH2O=0.1kgf/cm2(Kgf /cm2 )=9.8kPa(KPa)
      5. For other special requirements, please discuss with us and clearly indicate them in the order.

      今天晚上开的什么码 洛川县| 海兴县| 隆德县| 晋宁县| 榆中县| 鹤山市| 惠来县| 明光市| 高雄县| 龙南县| 嵊泗县| 惠州市| 长宁县| 玉溪市| 新建县| 化德县| 西乌珠穆沁旗| 镇康县| 潞城市| 平乐县| 剑阁县| 苏州市| 拜城县| 宁晋县| 阳曲县| 扎赉特旗| 厦门市| 米易县| 西华县| 安福县| 辛集市| 济阳县| 康定县| 佛学| 仙居县| 梁山县| 绥中县| 长汀县| 静海县| 临高县| 嘉鱼县| http://m.lsj3mv.club http://www.an792.cn http://m.lsj6ua.pw http://so.5j3pl8.top http://m5.sinanpf.pw http://www.k30613.cn